Dosing dispersing machine main motor, reducer, agitator shaft and blades and other components. Stirring blade forms, but no matter what form of a blade, a stirrer in operation, it has produced two shaft power consumption part of the role, in part generated by the discharge amount of blade, and the other part is the pressure generated by the blade head.

Blade pressure generated at the head can be divided into two parts, i.e., static head and shear forces; paddle mixer in operation, must overcome the static head, so that the material and the shear forces disperse and mix.

Efficient mixing system Safety Precautions: dispersing machine

1, the installation staff should be familiar with the appropriate qualifications and knowledge of mechanical equipment installation personnel to carry out installation work.
2, need efficient stirrer mounted vertically, vertical deviation should not exceed 5 degrees.
3, efficient stirring system and solid non-stirring viscosity liquids.
4, motor and bearing temperature can not run in excess of 75 ℃ case.
5, the motor and gearbox bearings and can not run in case of lack of lubricant.
6, the agitator shaft and blade can not be run bending or deformation. Found for bent shaft or blade deformation phenomena should immediately stop processing or replacement.
7, efficient mixing system during operation is strictly prohibited to avoid damaging debris into the reaction pool stirrer shaft and blade.
8. The people need to go to the reaction tanks for cleaning or maintenance operations, you must power off the motor and hang "DO NOT TURN ON" warning signs. During manual clearing tanks and maintenance work, there must be someone outside of the reaction tank monitoring.
9, after efficient agitation system running for some time, as have the reaction bottom sediment and impurities, debris, should be promptly stopped rinse with water or manual cleaning to ensure the safe operation of the mixer.